Autel AutoLink AL619 OBDII CAN ABS And SRS Diagnostic Scanner Tool Update Online

 [US/UK Ship No Tax] Autel AutoLink AL619

Autel AutoLink AL619 Scan Tool











  1. It is built to help you determine why the Malfunction Indicator Light or the ABS / SRS warning light is on.
  2. Vehicle Coverage: GM, Ford, Chrysler, Volvo, VW, BMW, Mercedes, Toyota, Honda, Nissan, Hyundai, Kia, Subaru, Mitsubishi, Peugeot, Citroen, Fiat, Renault, Landrover, Jaguar
  3. Update Online
  4. Works on ALL 1996 and newer vehicles (OBDII & CAN)

Note:

1. If you live in USA ,We will send by UPS, Only two days for you to receive it
2. If you do not live in USA, we will send by DHL from China Warehouse, Which need 3-5 days for you to receive it
3. Abarth, Alfa, Citroen, Dacia, Fiat, Lancia, Peugeot, and Renault are only for AL619EU

Autel AutoLink AL619 Highlights:

1. Update Online
2. Multi-Language Supported:  German/ French/ Spanish/ Portuguese/ Polish/ Italian/ Dutch/ Russian (The Default Language is English, after you receive the item from us, please register on Autel official website, and pass me serial number, we will change the language you want.)
3. Vehicles Coverage: Works on All 1996 and newer vehicles (OBDII & CAN), such as GM, Ford, Chrysler, Volvo, VW, BMW, Mercedes, Toyota, Honda, Nissan, Hyundai, Kia, Subaru, Mitsubishi, Peugeot, Citroen, Fiat, Renault, Landrover, Jaguar 
4. Functions: Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models 

Autel AutoLink AL619 Features:

Retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes
Turns off Malfunction Indicator Light (MIL) and ABS/SRS warning lights, clears codes and resets monitors
Views freeze frame data
Reads, stores and playbacks live PCM datastream and live sensor data
Graphs data
Retrieves vehicle information (VIN, CIN and CVN)
Troubleshooter code tips guide technicians to the root cause of trouble codes faster
Multilingual menu and DTC definitions – English, Spanish and French
TF memory card for data backup and software update
Internet updatable and upgradable
Prints data via PC

Autel AutoLink AL619 Functions:

1. Graphs data
2. Views freeze frame data
3. Restores and clears codes in Anti Lock Braking System (ABS)
4. Restores and clears codes in Supplemental Restraint (Airbag) System (SRS)
5. Shows monitor and I/M preparation status (discharge)
6. Retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes
7. Turns off Malfunction Indicator Light (MIL) and ABS/SRS warning lights, clears codes and resets monitors
8. Reads, stores and playbacks live PCM datastream and live sensor data
9. Retrieves/ Restores vehicle information (VIN, CIN and CVN)
10. Troubleshooter code tips guide technicians to the root cause of trouble codes faster
11. TF memory card for data backup and software update

Additional ABS/SRS Testing Function

ABS: in most vehicles is made up of an electronic hydraulic pump of two, three or most commonly four Wheel Speed Sensors (WSS), a G-force sensor, a Vehicle Speed Sensor and an ABS Control Module (EBCM). The EBCM is constantly monitoring the WSS, the Vehicle Speed Sensor, and the G-sensor. Diagnosing an ABS problem should always start with a visual inspection of all brake components, then you will need to retrieve ABS DTCs to tell you where the problem is.

SRS: is made up of Impact Sensors, a Control Module, and Airbags. When the impact sensors detect a collision they send an extremely fast signal to the control module, which relays that signal to the airbags, deploying them to help prevent vehicle occupants from hitting interior objects such as steering wheels, dashboards, and the like. When the control module detects a problem with the airbags or sensors the Malfunction Indicator Light (MIL) will turn on.
The ABS/SRS diagnostic function is used to retrieve and clear codes from the vehicles ABS/SRS systems. It also provides the definition of each code to help diagnose problem areas within the systems that may cause the Malfunction Indicator Light (MIL) to turn on.

FAQ:

Q1: How do I register my Autel AL619 scan tool?
A1: There are two different registrations that you have to carry out. The first registration is for updating the software which is specifically to install the car manufacturer updates and the second registration is to look up your device manual and link up with the brand online. The update software can be found on the disc included in the purchase or you can as well download it from Autel's website.

During the installation of updates, you will have to insert the device model. In addition, you'll as well create your username and password. This is will be totally different from the one that you sign online with Autel. Normally, the online user ID/name will be your email address and the user ID/name on the Autel update software will be unique.

Q2: How does the AL619 differ from the AL519?
A2: The Autel AL619 is for diagnosing ABS and Airbag, while the Autel Al519 is for diagnosing the vehicle engine. Also, the Autel AL619 is slightly costly than the Autel AL519

Q3: Vehicle Linking Error?
A3: A communication error occurs if the scan tool fails to communicate with the vehicles ECU (Engine Control Unit).
You need to do the following to check up:
Verify that the ignition is ON.
Check if the scan tools OBD II connector is securely connected to the vehicles DLC.
Verify that the vehicle is OBDII compliant.
Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing.
Verify the control module is not defective.

Q4: Operating Error?
A4: If the scan tool freezes, then an exception occurs or the vehicles ECU (Engine Control Unit) is too slow to respond to requests. You need to do the following to reset the tool:
Reset the scan tool.
Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the testing.

Q5: Scan tool doesnt power up?
A5: If the scan tool won't power up or operates incorrectly in any other way, you need to do the following to check up:
Check if the scan tools OBD II connector is securely connected to the vehicles DLC;
Check if the DLC pins are bent or broken. Clean the DLC pins if necessary.
Check vehicle battery to make sure it is still good with at least 8.0 volts.

Q6: If the scan tool fails to communicate with the vehicles ECU (Engine Control Unit) more than three times, a LINKING ERROR! message shows up on the display.
A6: Verify that the ignition is ON.
Check if the scan tools OBD II connector is securely connected to the vehicles DLC.
Verify that the vehicle is OBD2 compliant.
Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and repeat the procedure from step 5.
If the LINKING ERROR? message does not go away, then there might be problems for the scan tool to communicate with the vehicle. Contact your local distributor or the manufacturers customer service department for assistance.

Autel AutoLink AL619 Specification:

Display                                TFT color display (320 x 240 dpi)
Operating Temperature      0 to 60°C (32 to 140 F°)
Storage Temperature          -20 to 70°C (-4 to 158 F°)
External Power                    8.0 to 18.0 V power provided via vehicle battery

Package List:

1pc x Auto Link AL619
1pc x User manual
1pc x USB cable
1pc x OBDII Cable
1pc x Protective Nylon Case
1pc x TF card
1pc x 3.7V Li-ion battery

Autel AutoLink AL619 Feedback/Reviews:

If you have been searching for a reliable and quality diagnostic scanner at a wonderful price, this is the best choice for you. The Al619 is an excellent scanner with outstanding features. This is despite it being offered at a great price. Actually, scan tools within the same price range come with fewer features. So, you get more when you purchase this diagnostic code reader. Also, its portability makes to be a favorite among DIY enthusiasts and start-up technicians. I hope this Autel AL619 review has given a clear idea about this code reader. Instead of searching through various brands for a quality and affordable scan tool, you can get the Autel al619 code reader and diagnose the error codes.

The Autel Al619 diagnostic scan tool is a great OBD2 scanner for beginner technicians, mechanics or DIY enthusiasts who want to advance from a basic code reader to an advanced scanner. Basic code readers are amazing and easy to use, but they’re only suitable for small tasks like reading and clearing error codes.
For those who want to an Autel brand scanner at an affordable price; the Autel AL619 is a great tool to acquire. It is sold at a very fair price but comes with additional features that basic scanners lack. The AL619 automotive scanner can determine why the check engine light, SRS, or ABS warning lights are on. Read this Autel AL619 review to know more about this scanner.

Autel AutoLink AL619 Reviews


1. The Autel AL619 is a versatile code reader as it is able to retrieve manufacturer-specific, generic, and pending codes.
2. This scanner has the ability to diagnose and erase both the anti-lock braking system and safety restraint system. These two are very important safety features for any car.
3. Apart from providing a visual display with LEDs, the AL619 as well offers audio sounds. This built-in audio technique informs the user when the scanner is done scanning and fully repaired.
4. It is compatible with a wide range of vehicles that are OBD1, OBD2, and CAN compliant. This includes more than 50 car brands from Asia, Europe, and the domestic market.
5. It is of a compact design and lightweight as it only measures 70.9 by 31.5 by 102.4-inches. With these two features, this is a simple to use and portable diagnostic code reader.
6. It as well features the IM messaging which offer the user the capacity to get live data feeds and the ability to check the status emissions.
7. The Autel AL619 performs a wide range of functions such as retrieving vehicle information, retrieve and clear codes in ABS & SRS, view freeze frame data, and reads, stores, and playback live data stream.

Comments

Popular posts from this blog

OBDSTAR X300 DP Vs Xtool X-100 PAD2 Comparison

Autel Maxisys Elite Diagnostic Tool with WiFi BT Full OBD2 Automotive Scanner +J2534 ECU Programmer Upgraded of MS908P MK908P